Kryptos blog
Step-by-step guides and practical tips for Fire & Gas mapping, from the plant model to the final report.
Step-by-step guides
Whole jobs in Kryptos, from start to finish.
Navisworks file import done in just about a minute
Open a Navisworks NWD or NWC file straight in Kryptos, keep its colours, split it by category and make it lighter, without exporting anything first.
5 min read
Gas detectors auto-placed by Kryptos on a real offshore deck, in 1 minute 8 seconds
A step-by-step gas mapping of the Huldra cellar deck, 38 × 40 × 5 m, with two timed optimisation runs: 17 open path and point detectors in 1 minute 8 seconds, 22 point detectors only in 2 minutes 39 seconds.
12 min read
Fire detectors auto-placed and aimed by Kryptos on a real offshore deck, in 63 seconds
A step-by-step fire mapping of the Huldra cellar deck, 38 × 40 × 5 m, with all three fire detection methods timed: 11 detectors in 1 minute 3 seconds, 19 in 2 minutes 18 seconds and 53 in 5 minutes.
15 min read
Shop for fire detectors with rapid auto-optimisation in Kryptos
27 fire optimisations in one hour on the Huldra cellar deck compare three detector models side by side: 513 detectors placed and over 118,000 positions tried, and the model with the shortest range needed the fewest detectors.
8 min read
Your Fire & Gas report, in 31 languages or two side by side
Build the Word report for your Fire & Gas mapping study in one language, or in two languages in the same document, with coverage tables, detector lists and plots.
9 min read
Best practices
Short answers to the questions engineers ask most.
How to import only the equipment from a Navisworks model?
Bring just the equipment of a large Navisworks model into Kryptos, and ignore the piping, structure and everything else, in one import.
4 min read
How to rename detectors in bulk?
Rename hundreds of detectors at once to match your project's tag numbers, by exporting them to Excel, renaming them there and importing them back.
4 min read
How to use sub-zones in Kryptos?
Give part of an area its own coverage target and its own line in the results, by adding a custom risk grade named for the sub-zone.
5 min read
How to perform acoustic mapping in Kryptos?
Map acoustic (ultrasonic) gas leak detectors in Kryptos by adding an acoustic gas component, entering each detector's listening range as the grade size, and giving the mapping its own name.
5 min read